Our Jet and V-Drive fresh water header collector points down at a steeper angle to accommodate most applications.  The primary tubes a approximately 2" longer than our standard header with the collector length being 8".  In many Jet and V-Drive applications there's ample space to allow for a longer collector to help fight reversion.  Keep in mind, that if the exhaust ports are below water line the header can literally pull water up from outside the boat. The header typically comes as a two piece design as shown, but optionally can be made as a one piece unit.  Headers come complete with water supply manifold, gaskets, bolts, pet cocks, feed hose and clamps.

 

 

 

More header info                 How to Measure  Jet            How Measure V-Drive

OPTIONS
 
40400  Modify to fit existing exhaust ports, starting at    75.00

40401  Add Collector Length                         starting at    30.00
40412  Dry Tail Pipes  Polished Stainless Steel            525.00
40402  Extended  Dry Pipe, starting at                            150.00
40427  Reduced Water                                                    105.00
40421  Extra valve cover clearance                                125.00

40425  Preheat  Option                                                   125.00
40408  Pyrometer fitting                                                  85.00
40409  O2 Sensor fitting                                                  105.00
40450  Custom Colors                                                    175.00

    40475 Muffler                                                                 132.00